SSD Health Check 1.5

  1. Ssd Life

SSD stands for a solid-state drive which is used in the computers as a storage drive. SSD uses (NAND) flash-based memory by replacing the traditional mechanical hard drives. The major benefits of an SSD are it substantially increases the speed of the computer by improving the read and write speed, enhances battery life, faster sharing of files, etc.

Since SSDs are used by most of the business enterprises or companies dealing with a huge amount of data, gamers to improve the gaming experience, servers for a faster read, and write speed to effectively serve clients, etc. it becomes important to monitor the health of the SSD.

An aftermarket SSD may ship with utility software that monitors an NVMe SSD drive’s health, but Windows itself does not monitor the drive. In this test feature, Windows 10 will add NVMe SSD. To check the health of a SSD. For Ubuntu, Mint, or Debian based distributions. # apt-get install smartmontools. The MediaWearoutIndicator is what you are looking for. For 100 means your ssd has 100% life, the lower number means less life left. # smartctl -a /dev/sda grep MediaWearoutIndicator.

SSD saves tons of important files based on its storage capacity. Hence, properly monitoring the health of an SSD is crucial to avoid business interruption due to the data loss scenario.

Note: It is recommended to take a regular backup of all your important files to avoid any data loss scenarios on your Windows computer or SSD. If not then, make use of Yodot Hard drive Recovery software which is compatible with all your Windows operating systems including the latest Windows 10 and its previous versions to restore files deleted, lost, and inaccessible from the SSD.

5 Best Reliable SSD Health Check Tools

Below are the 5 most relevant health check tools for a solid-state drive to monitor the health and optimize performance.

  1. Smartmonotools

    Smartmonotools comprises of two different utility programs called smartctl, which is a command-line utility and smartd, a daemon program providing monitoring service. These utility programs analyze the performance of SSD or HDD using the Self-Monitoring, Analysis, and Reporting Technology System (SMART).

    Most importantly Smartmonotools issues the early warning of SSD failure. During such time you can easily backup all your important data saved on the SSD to avoid data loss.

    The Smartmonotools was first developed for the Linux operating system and then, it has been ported to Darwin for Mac OS X (no SCSI support yet), FreeBSD, NetBSD, OpenBSD, OS/2 (no SCSI support), Solaris and Windows operating system.

  2. Hard Disk Sentinel

    Hard Disk Sentinel is a specialized tool to monitor and analyze SSD or HDD. By installing this tool on your Windows computer, you can easily find reports on SSD’s performance degradation, health, temperature, disk transfer speed in real-time, failures, etc. This software can even track and fix multiple issues related to your SSD.

    This tool is an all in one performance review software to monitor the status of internal hard disks, external HDD, SSD, Hybrid disk drives, NAS drives, and many others.

  3. Intel Solid-State Drive Toolbox

    The Intel Solid-State Drive Toolbox is an Intel’s official drive management program for the Windows operating system. This tool tracks the latest information about the SSD, runs full diagnostic scans to understand the read and write capacity of your Solid State Drives, performs the firmware update, and also optimizes the performance for a healthier life.

    In case if you lose data on your SSD due to various reasons like accidental deletion of files from SSD, formatting SSD, solid-state drive corruption, etc. then you can easily recover data using Yodot software in simple clicks. Yodot is a specialized data recovery tool to restore data from various internal and external storage devices like SSD, external hard drive, USB, etc.

  4. Crystal Disk Info

    Crystal Disk Info is an SSD health check tool that works on the SMART function to give you information related to Solid State Drive performance or status. Most importantly, this tool even monitors the current disk temperature.

    With the help of this software, you can access the latest data such as the interface port details, buffer size, total power counts/ hours, reading and writing speed, etc. This information easily helps you understand the current status of your SSD.

  5. Samsung Magician

    Samsung Magician is a wonderful tool to analyze your SSD including the total bytes written on it to give you a complete SSD performance report. This tool performs a S.M.A.R.T. Check to verify the health of your SSD and detect probable SSD failures before they occur.

Samsung Magician is one of the best tools to optimize your SSD performance on your Windows computer and compare the performance scores with the prior results. Moreover, you can also encrypt the SSD drive to protect your private data.


There is no doubt that monitoring the health of an SSD is crucial as it saves a huge amount of important data. In today’s world, verifying and improving the performance of SSDs by repairing errors and managing data on it is easy due to the Health Check tools available. If you incur any data loss scenario on your SSD, then you can install Yodot Hard drive recovery tool safely to restore all your deleted or lost data from formatted, corrupted SSD, internal or external HDD, memory card, USB drive, etc.

CrystalDiskInfo is a HDD/SSD health monitoring utility. It displays basic HDD (also SSD and USB-HDD) information, monitors S.M.A.R.T. values and disk temperature. It will also display the S.M.A.R.T data as a list so you can see the specific issue that a hard drive may have. It provides a health rating based on your drive’s SMART status, plus will list its temperature, enabling you to see just how hot your drives are running. As various factors approach thresholds of danger, CrystalDiskInfo will alert you, letting you know it's time to make backups while you still can.

Ssd Life

CrystalDiskInfo 8.5.0 changelog:

  • Updated UI library(

  • Reduced exe file size using “_AFX_NO_MFC_CONTROLS_IN_DIALOGS” option

  • Added PerMonitorDPIv2 support

  • Changed default font from Tahoma to Segoe UI

  • Added Dark theme for standard edition

  • Added ShizukuTeaBreak [Shizuku Edition]

  • Changed ShizukuHotaru/ShizukuSakuraNight/ShizukuMikoNight theme to dark taste [Shizuku Edition]

  • Added font size customize

  • Deleted GDI+ font render mode

  • Deleted ARM32 support

Changes in v8.5.1:

  • Fixed Auto Refresh Function

Download: CrystalDiskInfo 8.5.1 5.9 MB (Open Source)
Download: Portable CrystalDiskInfo 8.5.1 9.3 MB
View: CrystalDiskInfo Home Page

Get alerted to all of our Software updates on Twitter at @NeowinSoftware